Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility

Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.

$4.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Hose fittings fit many of SRAM's newest hydraulic brake models.
- Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

The Problem Solvers Travel Agent amplifies your braking power so that you can mix road, mountain and cyclocross brakes and brake levers. Instead of buying new levers or brakes, just install a Travel Agent and you're good to go. This trick gizmo is made of quality 6061 aluminum and is available with and without a built-in adjustment barrel. It works with cantilever brakes, road dropped handlebars, and Shimano STI and Campagnolo Ergopower levers.

Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)

Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)

$26.00
- Raises the stem height of threadless systems without installing a longer steerer tube
- Spacers can be placed above or below the stem to fine tune height
- Compatible with steel and aluminum steerer tubes only
- Includes spacers and top cap

$42.00 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

$19.99
The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut.
- One-piece design is lightweight (only 4g)
- Not suitable for "expanding" star nuts with a steel coil spring
- Compatible with the ENVE compression plug

$21.99
absoluteBLACK's Chain Catcher is designed to eliminate the possibility of the chain falling in towards the frame when shifting to the inner chainring on uneven road. Chain Catcher is a simple add-on component which improves the overall function of your drive train and protects your valuable frame from dropped chains. Especially recommended for carbon frames.
No matter how well you set up the front derailleur with round or oval rings, there is always a possibility that chain may find its way to drop on the frame when you shift quickly from outer ring to inner one. Especially on rough or gravel roads. Mounting the Chain Catcher in front of the front derailleur will prevent such occurrence from happening because the chain will be guided precisely onto the small ring and will not be able to go any further towards the frame.
Our Chain Catcher has a conical tapered head, providing an excellent fit to braze-on mounts that are integrated with frame. However, with older frames you may use a clamp braze-on adapter. In such case please ensure that your adapter has a front face also conical (not flat).
Unlike the majority of chain catchers on the market, absoluteBLACK's Chain Catcher can be precisely adjusted to ensure only minimal gap is left to the inner chainring for maximum security.
- Mass/Size: 11.6g / one size fits all
- Compatibility: All braze-on frames and derailleurs.
- Adjustability: 6mm chainline adjustment provided on the slot for precise setup
- Material: CNC machined 7075 T6 / M5 stainless steel bolt
- Finish: type II anodizing

$499.00
The absoluteBLACK's HOLLOWcage® for SRAM eTap AXS RED and Force 12-speed derailleurs makes the AXS drivetrain whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made.
- Designed for use with SRAM RED and Force AXS drivetrains
- The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise
- Incredibly silent (over 12dB noise reduction vs stock)
- HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision
- One of the lightest oversized cages on the market (69g)
- Works with 10-28t, 10-33t, and 10-36t cassettes
- Not compatible with SRAM XPLR or 11-speed RED/Force
- ONLY works with AXS flat top chain

$499.00
The absoluteBLACK's HOLLOWcage® for SRAM eTap AXS RED and Force 12-speed derailleurs makes the AXS drivetrain whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made.
- Designed for use with SRAM RED and Force AXS drivetrains
- The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise
- Incredibly silent (over 12dB noise reduction vs stock)
- HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision
- One of the lightest oversized cages on the market (69g)
- Works with 10-28t, 10-33t, and 10-36t cassettes
- Not compatible with SRAM XPLR or 11-speed RED/Force
- ONLY works with AXS flat top chain

$499.00
The absoluteBLACK's HOLLOWcage® for Shimano 9100 and 8000 derailleurs makes the 9100 and 8000 drivetrains whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made.
- Designed for use with Shimano Dura-Ace 9100 / 9150 / 9170 , and Ultegra 8000 / 8050 drivetrains
- Fits up to a 32t cassette
- The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise
- Incredibly silent (over 12dB noise reduction vs stock)
- HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision
- Upper pulley features tall teeth to provide improved shifting precision
- One of the lightest oversized cages on the market (71g)
- Not compatible with Ultegra Long GS cage derailleurs

$499.00
The absoluteBLACK's HOLLOWcage® for Shimano 9100 and 8000 derailleurs makes the 9100 and 8000 drivetrains whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made.
- Designed for use with Shimano Dura-Ace 9100 / 9150 / 9170 , and Ultegra 8000 / 8050 drivetrains
- Fits up to a 32t cassette
- The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise
- Incredibly silent (over 12dB noise reduction vs stock)
- HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision
- Upper pulley features tall teeth to provide improved shifting precision
- One of the lightest oversized cages on the market (71g)
- Not compatible with Ultegra Long GS cage derailleurs

$499.00
The absoluteBLACK's HOLLOWcage® for Shimano 9100 and 8000 derailleurs makes the 9100 and 8000 drivetrains whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made.
- Designed for use with Shimano Dura-Ace 9100 / 9150 / 9170 , and Ultegra 8000 / 8050 drivetrains
- Fits up to a 32t cassette
- The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise
- Incredibly silent (over 12dB noise reduction vs stock)
- HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision
- Upper pulley features tall teeth to provide improved shifting precision
- One of the lightest oversized cages on the market (71g)
- Not compatible with Ultegra Long GS cage derailleurs

$499.00
The absoluteBLACK's HOLLOWcage® for Shimano Dura-Ace 9250 12-speed derailleurs makes the 9250 drivetrain whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made.
- Designed for use with Shimano Dura-Ace 9250 drivetrains
- Fits up to a 34t cassette
- The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise
- Incredibly silent (over 5-7dB noise reduction vs stock)
- HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision
- One of the lightest oversized cages on the market (71g)

$499.00
The absoluteBLACK's HOLLOWcage® for Shimano Dura-Ace 9250 12-speed derailleurs makes the 9250 drivetrain whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made.
- Designed for use with Shimano Dura-Ace 9250 drivetrains
- Fits up to a 34t cassette
- The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise
- Incredibly silent (over 5-7dB noise reduction vs stock)
- HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision
- One of the lightest oversized cages on the market (71g)

$499.00
The absoluteBLACK's HOLLOWcage® for Shimano Ultegra 8150 12-speed derailleurs makes the 8150 drivetrain whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made.
- Designed for use with Shimano Ultegra 8150 drivetrains
- Fits up to a 34t cassette
- The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise
- Incredibly silent (over 5-7dB noise reduction vs stock)
- HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision
- One of the lightest oversized cages on the market (71g)

$499.00
The absoluteBLACK's HOLLOWcage® for Shimano Ultegra 8150 12-speed derailleurs makes the 8150 drivetrain whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made.
- Designed for use with Shimano Ultegra 8150 drivetrains
- Fits up to a 34t cassette
- The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise
- Incredibly silent (over 5-7dB noise reduction vs stock)
- HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision
- One of the lightest oversized cages on the market (71g)

$69.95
The absoluteBLACK Oval Chainguide is designed specifically for oval chainrings, keeping the chain secure at every single crank position
- Fully compatible with oval chainrings
- The adjustable 48-53mm chainline makes it compatible with most bike setups
- Includes titanium hardware and spacers

$61.95
The absoluteBLACK Oval Chainguide is designed specifically for oval chainrings, keeping the chain secure at every single crank position
- Fully compatible with oval chainrings
- The adjustable 48-53mm chainline makes it compatible with most bike setups
- Includes titanium hardware and spacers

$64.95
The absoluteBLACK Oval Chainguide is designed specifically for oval chainrings, keeping the chain secure at every single crank position
- Fully compatible with oval chainrings
- The adjustable 48-53mm chainline makes it compatible with most bike setups
- Includes titanium hardware and spacers

$61.95
The absoluteBLACK Oval Chainguide is designed specifically for oval chainrings, keeping the chain secure at every single crank position
- Fully compatible with oval chainrings
- The adjustable 48-53mm chainline makes it compatible with most bike setups
- Includes titanium hardware and spacers

$112.95
The absoluteBLACK Oval Bash Guide is designed specifically for oval chainrings, keeping your chain secure at every single crank position. This bash guard system provides exceptional durability with maximum weight savings thanks to intelligent design and titanium hardware.
- Fully compatible with oval chainrings
- The adjustable 48-53mm chainline makes it compatible with most bike setups
- Includes titanium hardware and spacers
Page 1 of 50
Next page